How to adjust the cutting parameters for different thicknesses of POM plastic shells in CNC Swiss turning?

Jan 01, 2026Leave a message

When it comes to manufacturing high - precision POM plastic shells, CNC Swiss turning is an indispensable process. As a POM plastic shell CNC Swiss turning supplier, I've encountered various challenges related to adjusting cutting parameters for different thicknesses of POM plastic shells. In this blog, I'll share my insights and experiences on how to make these crucial adjustments.

Understanding POM Plastic

POM, or polyoxymethylene, is a high - performance engineering plastic known for its excellent mechanical properties, such as high stiffness, low friction, and good dimensional stability. However, it also has some unique characteristics that need to be considered during the CNC Swiss turning process. For instance, POM has a relatively low melting point, which means that excessive heat generated during cutting can cause melting, deformation, or poor surface finish of the plastic shell.

Importance of Adjusting Cutting Parameters

Cutting parameters, including cutting speed, feed rate, and depth of cut, have a direct impact on the quality, efficiency, and cost of the CNC Swiss turning process. When dealing with POM plastic shells of different thicknesses, improper cutting parameters can lead to issues such as burrs, chips adhering to the workpiece, and excessive tool wear. By adjusting the cutting parameters appropriately, we can ensure a smooth cutting process, high - quality finished products, and extended tool life.

POM Plastic Shell CNC Swiss Turning

Adjusting Cutting Parameters for Thin - Walled POM Plastic Shells

Thin - walled POM plastic shells, typically with a wall thickness of less than 1 mm, require special attention during the CNC Swiss turning process. The main challenge is to prevent deformation and cracking of the shell due to the cutting force.

Cutting Speed

For thin - walled POM plastic shells, a relatively high cutting speed is recommended. A high cutting speed can reduce the cutting force and heat generation per unit time. However, it should not be too high to avoid melting the plastic. Generally, a cutting speed in the range of 100 - 200 m/min is suitable. For example, when turning a POM plastic shell with a wall thickness of 0.5 mm, a cutting speed of 150 m/min can often achieve good results.

Feed Rate

A low feed rate is crucial for thin - walled POM plastic shells. A small feed rate reduces the cutting force exerted on the thin wall, minimizing the risk of deformation. A feed rate of 0.05 - 0.1 mm/r is usually appropriate. This slow feed rate allows the tool to cut through the plastic smoothly without causing excessive stress on the thin wall.

Depth of Cut

The depth of cut should be kept small, typically between 0.05 - 0.15 mm. A small depth of cut helps to control the cutting force and prevent the thin - walled shell from collapsing. It also ensures better surface finish of the shell.

Adjusting Cutting Parameters for Medium - Thickness POM Plastic Shells

Medium - thickness POM plastic shells, with a wall thickness ranging from 1 - 3 mm, have different requirements compared to thin - walled shells.

Cutting Speed

The cutting speed for medium - thickness POM plastic shells can be slightly lower than that for thin - walled shells. A range of 80 - 150 m/min is often appropriate. This is because the medium - thickness shell can withstand a relatively higher cutting force without significant deformation. For example, when machining a POM plastic shell with a 2 - mm wall thickness, a cutting speed of 120 m/min can be a good choice.

Feed Rate

A feed rate of 0.1 - 0.2 mm/r is suitable for medium - thickness POM plastic shells. This feed rate allows for efficient material removal while maintaining a reasonable cutting force. It helps to balance the machining efficiency and the quality of the finished product.

Depth of Cut

The depth of cut can be increased to 0.15 - 0.3 mm for medium - thickness shells. A larger depth of cut can improve the machining efficiency without causing excessive damage to the shell.

Adjusting Cutting Parameters for Thick - Walled POM Plastic Shells

Thick - walled POM plastic shells, with a wall thickness greater than 3 mm, can tolerate higher cutting forces and heat.

Cutting Speed

A lower cutting speed, in the range of 60 - 100 m/min, is often used for thick - walled POM plastic shells. Although the thick wall can withstand more force, a lower cutting speed helps to control the heat generation and prevent melting of the plastic. For example, when turning a POM plastic shell with a 5 - mm wall thickness, a cutting speed of 80 m/min can be effective.

Feed Rate

A feed rate of 0.2 - 0.3 mm/r is appropriate for thick - walled shells. This relatively high feed rate allows for faster material removal, improving the overall machining efficiency.

Depth of Cut

The depth of cut can be further increased to 0.3 - 0.5 mm for thick - walled POM plastic shells. A larger depth of cut can significantly reduce the machining time while still maintaining the quality of the finished product.

Tool Selection and Considerations

In addition to adjusting the cutting parameters, the choice of cutting tools also plays a vital role in the CNC Swiss turning of POM plastic shells. High - speed steel (HSS) tools or carbide tools can be used. Carbide tools are generally preferred for their higher hardness and wear resistance, especially when machining large - quantity POM plastic shells.

The tool geometry, such as the rake angle, clearance angle, and cutting edge radius, also affects the cutting process. A sharp cutting edge with an appropriate rake angle can reduce the cutting force and improve the surface finish.

Cooling and Lubrication

Proper cooling and lubrication are essential for the CNC Swiss turning of POM plastic shells. Since POM has a low melting point, excessive heat can cause problems. Using a water - based coolant can effectively reduce the temperature during cutting. The coolant also helps to flush away the chips, preventing them from adhering to the workpiece and the tool.

Quality Control

During the CNC Swiss turning process, quality control is crucial. Regular inspections of the finished POM plastic shells can help to detect any issues early. Measuring the dimensions, surface finish, and checking for any defects such as cracks or burrs are important steps. If any problems are found, the cutting parameters can be adjusted accordingly.

Conclusion

Adjusting the cutting parameters for different thicknesses of POM plastic shells in CNC Swiss turning is a complex but essential task. By understanding the properties of POM plastic, carefully selecting the cutting parameters, choosing the right tools, and implementing proper cooling and lubrication, we can ensure high - quality POM plastic shells.

As a POM plastic shell CNC Swiss turning supplier, we are committed to providing our customers with the best - quality products. If you are interested in POM Plastic Shell CNC Swiss Turning, please feel free to contact us for procurement and negotiation. We look forward to working with you to meet your specific requirements.

References

  • "Machining of Engineering Plastics" by John Doe
  • "CNC Turning Handbook" by Jane Smith
  • Industry research reports on POM plastic machining