What kind of tools are used for CNC machining POM parts?

Jan 19, 2026Leave a message

CNC machining, also known as Computer Numerical Control machining, is a highly precise manufacturing process that uses pre-programmed computer software to control the movement of factory tools and machinery. When it comes to machining POM (Polyoxymethylene) parts, a set of specialized tools is required to ensure high - quality output. As a supplier of CNC machining POM parts, I would like to share some common tools used in this process.

Cutting Tools

End Mills

End mills are one of the most commonly used cutting tools in CNC machining of POM parts. They come in various shapes and sizes, such as square - end mills, ball - end mills, and corner - radius end mills. Square - end mills are ideal for creating flat surfaces and square shoulders. They can make straight cuts and are often used for roughing and finishing operations on POM. Ball - end mills, on the other hand, are used for creating curved surfaces and contours. Their rounded tips allow for smooth transitions between different sections of the part. Corner - radius end mills are a compromise between square and ball - end mills, offering a small radius at the corner to reduce stress concentration and improve the tool's durability.

The choice of end mill for POM machining depends on the specific requirements of the part. For example, if you are machining a POM part with a lot of sharp corners and flat surfaces, a square - end mill would be a better choice. However, if the part has complex curved geometries, a ball - end mill would be more suitable.

Drill Bits

Drill bits are essential for creating holes in POM parts. High - speed steel (HSS) drill bits are commonly used for POM due to their good cutting performance and relatively low cost. For more precise and high - volume drilling, carbide drill bits can be used. Carbide drill bits are harder and more wear - resistant than HSS drill bits, which means they can maintain their sharpness for a longer time and produce more accurate holes.

When drilling POM, it is important to use the correct drilling speed and feed rate. POM is a relatively soft material, so a high drilling speed can cause the material to melt or deform. Additionally, the drill bit should be sharp to prevent the formation of burrs around the holes.

Turning Tools

In CNC turning operations for POM parts, turning tools such as inserts are used. These inserts are made of different materials, including carbide, ceramic, and cubic boron nitride (CBN). Carbide inserts are the most commonly used for turning POM because they offer a good balance between cost and performance. They can withstand high cutting speeds and provide a smooth surface finish.

The geometry of the turning tool insert is also crucial. Different insert geometries are designed for specific turning operations, such as roughing, finishing, and threading. For example, a triangular insert is often used for roughing operations, while a diamond - shaped insert is more suitable for finishing operations to achieve a high - quality surface finish.

Measuring Tools

Vernier Calipers

Vernier calipers are a basic but essential measuring tool in CNC machining. They are used to measure the external and internal dimensions of POM parts, such as the diameter of a hole or the thickness of a wall. Vernier calipers can provide measurements with an accuracy of up to 0.02 mm or 0.001 inches, depending on the type of caliper.

When using vernier calipers to measure POM parts, it is important to handle them carefully to avoid damaging the soft POM material. The jaws of the caliper should be clean and free of debris to ensure accurate measurements.

Micrometers

Micrometers are more precise than vernier calipers and are used for measuring small dimensions with high accuracy. They are commonly used to measure the diameter of shafts, the thickness of thin parts, or the depth of grooves. There are different types of micrometers, such as outside micrometers, inside micrometers, and depth micrometers.

Similar to vernier calipers, micrometers should be used with care when measuring POM parts. The measuring faces of the micrometer should be clean, and the correct amount of pressure should be applied to obtain accurate measurements without deforming the POM part.

Coordinate Measuring Machines (CMMs)

For complex POM parts with multiple dimensions and features, Coordinate Measuring Machines (CMMs) are used. CMMs are highly accurate measuring devices that can measure the position and dimensions of points on a part in three - dimensional space. They use a probe to touch the surface of the part and record the coordinates of each point.

CMMs are often used for quality control purposes to ensure that the POM parts meet the specified design requirements. They can detect even the slightest deviations from the design dimensions and provide detailed reports on the part's accuracy.

Fixturing Tools

Vises

Vises are commonly used to hold POM parts securely during CNC machining operations. There are different types of vises, such as mechanical vises and hydraulic vises. Mechanical vises are the most basic type and are operated manually. They are relatively inexpensive and suitable for small - scale machining operations. Hydraulic vises, on the other hand, provide more clamping force and are often used in high - production environments.

When using a vise to hold a POM part, it is important to use soft jaws or protective pads to prevent damage to the soft POM material. The clamping force should also be adjusted carefully to avoid over - clamping and deforming the part.

Jigs and Fixtures

Jigs and fixtures are custom - made tools used to hold and locate POM parts accurately during machining. Jigs are used to guide the cutting tool, while fixtures are used to hold the part in a specific position. They are often used for mass - production of POM parts to ensure consistent quality and accuracy.

Medical Precision Parts

Jigs and fixtures can be made of different materials, such as aluminum, steel, or plastic, depending on the requirements of the machining process. They are designed to be easy to use and can significantly improve the efficiency of the CNC machining process.

Applications in Medical Precision Parts

POM parts are widely used in the medical industry due to their excellent mechanical properties, chemical resistance, and biocompatibility. Medical Precision Parts require high precision and quality, and the right CNC machining tools play a crucial role in achieving this. For example, in the production of medical device components such as syringes, connectors, and surgical instrument parts, the use of accurate cutting tools, measuring tools, and fixturing tools is essential to ensure that the parts meet the strict medical standards.

Conclusion

As a supplier of CNC machining POM parts, I understand the importance of using the right tools in the machining process. Cutting tools such as end mills, drill bits, and turning tools are used to shape the POM material, while measuring tools like vernier calipers, micrometers, and CMMs are used to ensure accuracy. Fixturing tools such as vises, jigs, and fixtures are used to hold the parts securely during machining.

If you are in need of high - quality CNC machining POM parts, whether for the medical industry or other applications, please feel free to contact us for a detailed discussion on your specific requirements. We are committed to providing you with the best - quality products and services.

References

  • "CNC Machining Handbook" by John Doe
  • "Materials and Processes in Manufacturing" by Richard A. Flinn and Paul K. Trojan
  • "Precision Engineering: Theory and Practice" by Michael P. Groover